People who want to make an oasis of peace\nfrom their backyard can install or build a pool. Although it represents a significant\ninvestment (considering both the cost of installation and maintenance), this is\nan excellent way to cool off on summer days and relax after a busy day. And to\nenjoy it to the fullest, every pool requires regular maintenance.<\/p>\n\n\n\n
Dirt that stays on the surface of the water\nis not a big problem if you remove it regularly. Larger pieces can be picked up\nmanually or using a net. The problem is that small debris that settles at the\nbottom of the pool, which household owners usually neglect.<\/p>\n\n\n\n
Stagnant water full of dirt is an ideal environment for many microorganisms to breed. There are specially designed tools for cleaning the bottom and walls of the pool – under-water cleaners. When visiting websites like ryansbestreviews.com\/pool-vacuum-cleaners<\/a>, you will see that there are numerous models on the market in different price ranges. <\/p>\n\n\n\n But if you don’t want to buy this device\n(because you\u2019ll rarely use it), you can always improvise. For this project, you\nneed things you already have in your house and a bit of knowledge of physics.\nSo making a DIY under-water cleaner won’t cost you nearly anything, though it’s\nnot a bad idea to get a specialized vacuum head for pools.<\/p>\n\n\n\n There are special vacuum cleaners on the\nmarket for various types of pools. You should choose the model according to the\nmaterial of the pool bottom. The shape of the vacuum head will also depend on\nit. You should also keep these details in mind when making a DIY under-water\ncleaner.<\/p>\n\n\n\n You can find vacuum heads with wheels,\nwhich can be useful if there are some bigger things lying at the bottom. These\nmodels are also very easy to move on different surfaces. Then, some\nmanufacturers offer specially rounded add-ons, which will prevent surface\nscratching – these are suitable for irregularly shaped pools. <\/p>\n\n\n\n Vacuum heads with little brushes are\nespecially useful. They cut the time it takes to clean the pool because they do\ntwo things at the same time – vacuuming the particles and removing stains from\nthe bottom surface.<\/p>\n\n\n\n The model of hand-made vacuum cleaners described here is best suited for in-ground pools, which have a suction filter on their bottoms. You can use this unit with vinyl, fiberglass, tiles, and even gunite or concrete pools, but be aware that it may not be able to pick up all debris. More on good and bad sides of gunite bottoms read on this page<\/a>.<\/p>\n\n\n\n For making the cheapest version of under-water\ncleaners, you need a plastic funnel. It will be attached to a plastic, flexible\nhose (best from some old hoover), long enough to access all corners. Use hot\nglue, and do not save on quantity. This part of the improvised cleaner mustn’t\nleak water and air. <\/p>\n\n\n\n Apply the adhesive in thick layers inside\nthe hose, on the funnel, and to their joint. Next, you\u2019ll need a filter, and\nknee-high nylon tights will do the trick. Attach it to the funnel, tighten and\nsecure it with a rubber band. <\/p>\n\n\n\n Put the funnel end of the hose to the\nsuction filter inside the pool and wait for a few seconds. It\u2019s necessary to\nget rid of air bubbles. When you\u2019re sure there\u2019s no more air, and that the DIY\ncleaner is firmly attached to the suction filter, use the other end of the hose\nto pick up dirt from the bottom.<\/p>\n\n\n\n This model of hand-made under-water\ncleaners looks more like a real vacuum cleaner, mainly because it uses a real\nvacuum cleaner head. In this case, you need a long garden hose, approximately\none inch in diameter. It can be an old hose; it only matters that it doesn’t\nleak.<\/p>\n\n\n\n Using an adhesive tape and adhesive, attach\nan old hoover head (intended for upholstery cleaning) to one end of the hose.\nThen attach some firm stick to the hose, one meter in length. That will make\nyour vacuum cleaner to move better.<\/p>\n\n\n\n In order to initiate suction, water must\nflow out at the other end of the hose. Suck in the water with your mouth, but\nmake sure to move before you get the mouth full of dirty water. Water begins to\nleak due to the so-called siphon effect. <\/p>\n\n\n\n More on siphoning check on the following source:<\/p>\n\n\n\nVacuuming Supplies You Should Have<\/h1>\n\n\n\n
DIY Under-Water Cleaner with Plastic Funnel<\/h1>\n\n\n\n
Cleaner Using Siphon Effect<\/h1>\n\n\n\n